Samsung Sets New Standards for Cleanliness and Hygiene with the New Bespoke Jet Bot Combo™

Samsung's Bespoke Jet Bot Combo™

Powerful Features for More Efficient Cleaning

The new Bespoke Jet Bot Combo™ comes with powerful features to enable more efficient and effective cleaning. Equipped with a Digital Inverter Motor that generates powerful suction to sweep up hair, dirt and fine dust particles, along with a High Efficiency Brush with Self Cleaning Hair Grinder thatfinely cuts collected hair to prevent brush entanglement, this helps the robot vacuumcleaner to effectively enhance hair removal by 8.8 times.[1]

With dual rotating Spinning Mops to support deep cleaning cycles, the robot vacuum cleaner also boasts a cleaning efficiency of 93.3% for stubborn stain cleaning and 92.2% for general stain cleaning[2].

To cater to the different home environments, the robot vacuum cleaner is equipped with an upgraded dTOF LiDAR Sensor to quickly detect any objects in its cleaning route and navigate complex environments. The dTOF LiDAR Sensor widens the detection range by 79%[3], allowing the robot vacuum cleaner to plan its cleaning path more effectively by continuously scanning the environment to gather distance information and track its location, even in dark areas. The upgraded dTOF LiDAR sensor improves the robot vacuum's pathing capabilities.

The Bespoke Jet Bot Combo™ provides enhanced cleaning experiences with the robot vacuum cleaner's AI Floor Detect function, using 5 different sensors to distinguish between different floor types[4] and adjust the suction power accordingly for more effective cleaning cycles. The feature also enables the robot vacuum cleaner to automatically lift its mop pads by 10mm when it detects carpet with less than 5mm height and will automatically dock against the All-in-One Clean Station^TM Steam+ to detach the mop pads when long pile carpet (>10mm height) is detected. Homeowners can also tap on the SmartThings app to control how their Bespoke Jet Bot Combo™ cleans their living spaces through 4 different cleaning modes – Vacuum and Mop Together mode, Mopping after Vacuuming mode, Vacuum-only mode and Mop-only mode.

3D mapping on SmartThings allows homeowners to create virtual 3D maps of their living spaces on the app so that the robot vacuum cleaner can navigate around the house for its cleaning cycles. Homeowners can also add on another layer of programming to their robot by marking No-go-zones and Select & Go on their app to customise their cleaning schedules, while monitoring the robot vacuum cleaner's location and status in real time via Live Cleaning Report. The Bespoke Jet Bot Combo™ can draw and save up to 4 maps for multi-level floor layouts and cleaning. Maintenance Made Easy with the All-in-One Clean Station^TM Steam+

The Bespoke Jet Bot Combo™ comes equipped with an All-in-One Clean Station^TM Steam+, a multi-functional dockthat automates the cleaning, sanitisation, drying and maintenance of the robot vacuum cleaner to make daily home cleaning a breeze.

The All-in-One Clean StationTM Steam+ ensures the robot vacuum cleaner is cleaned and sanitised for its next cleaning cycle.

The All-in-One Clean Station^TM Steam+ also features Steam Sanitisation and Hot Air Drying functions to ensure optimal hygiene before the start of each cleaning cycle. With Steam Sanitisation, the All-in-One Clean Station^TM Steam+ sprays hot steam of up to 100℃5 against the robot vacuum cleaner's mop pads to reduce 99.99% of harmful bacteria[6] and effectively deodorises[7] the mop pads to avoid unpleasant odours often produced by wet mops. The Hot Air Drying feature further prepares the robot vacuum cleaner for each new cleaning cycle by using hot air[8] to dry the wet mop and cleaning plate quickly, reducing the moisture level down to below 5%[9] within 2 hours.

Homeowners can also look forward to less frequent maintenance as the robot vacuum cleaner can automatically dock at the All-in-One Clean Station^TM Steam+ to refill its water container (100ml) using the Auto Fill function, ensuring that there will always be clean water in the robot's tank to keep the mop pads moist for its next cleaning cycle.

The All-in-One Clean Station^TM Steam+ enables the robot vacuum cleaner to automatically dispose of dust, dirt and hairs in a hygienic manner through Auto Dust Emptying, complemented by a 2.5L disposable dust bag that needs replacement only every 2 to 3 months[10]. A Multi-layered Filtration system in the All-in-One Clean Station^TM Steam+ helps to trap 99.999% of fine dust[11], giving homeowners peace of mind during the auto dust emptying process.

Availability and Pricing

The latest Bespoke Jet Bot Combo™ is now available at the Samsung Online Store^[2] and selected consumer electronics stores. From 18 July to 12 August 2024, Samsung is running a National Day promotion, with the Bespoke Jet Bot Combo™ available at S$1,495 (usual recommended retail price at S$1,799).

For more information, please visit the Samsung website^[3].

ANNEX - Product Specifications

Hashtag: #Samsung

The issuer is solely responsible for the content of this announcement.

References

1. ^{^} Media OutReach Newswire (www.media-outreach.com)
2. ^{^} Samsung Online Store (www.samsung.com)
3. ^{^} Samsung website (www.samsung.com)